Whirlpool Front Load Washer Not Draining. The lid switch is a sensor that tells the machine when the lid is on the machine is closed. · the drain hose is 96” or more above the floor.
Washer Diagnostic not draining Whirlpool, Maytag, Roper & Kenmore from www.youtube.com
Straighten the hose for adequate water flow. The machine will not operate if it thinks the lid is open. Make sure that the drain hose is not kinked or clogged.
The Impellers Of The Drain Pump May Also Be Broken, Causing The Pump To Run Slowly.
Check behind the washer and straighten a kinked hose. · a handwash or delicate cycle was selected. Always try to create a good balance with your wash loads.
· The Drain Hose Is 96” Or More Above The Floor.
Tighten any loose components and replace any that are broken or missing. · the drain hose is kinked/clogged. Use this page to troubleshoot the issue.
Explore Front Load Laundry Set
Also, search for missing or loose bolts on the washer drum. The whirlpool wfw560chw 5.0 cu. Is a front load washing machine that offers plenty of room for bulky items with 5.0 cu.
A Foreign Object Or Small Piece Of Clothing That Has Slipped Past The Washer’s Filters And Is Obstructing The Pump Could Be The Root Of The Problem.
The machine will not operate if it thinks the lid is open. · a single bulky item was washed. Unplug the washer and unscrew the two screws that hold the control panel in place.
Mine Is A Duet, Mod.
This can result in suds building up near the drain. Make sure that the drain hose is not kinked or clogged. Some of the common reasons why include:
Share
Post a Comment
for "Whirlpool Front Load Washer Not Draining"
Post a Comment for "Whirlpool Front Load Washer Not Draining"